Marktech Optoelectronics Announces Multi-wavelength Emitters, Detectors and LEDs for Wearables

Marktech Optoelectronics WearablesDecember 3, 2018 – Latham, NY, USA  Marktech Optoelectronics, Inc. (www.marktechopto.com)(Marktech), a privately-held and veteran-owned leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced its dedicated offerings for wearables.

Marktech’s standard and custom emitters and detectors, in both multi-wavelength and hybrid designs and in UV, visible, infrared, and SWIR ranges, are routinely specified within consumer- and hospital-grade flexible, stretchable and wearable devices. Some of the most common wearable applications supported by Marktech include consumer-grade fitness trackers; high-end cardiac, oxygen, and blood pressure monitors; audiological diagnostic devices, used to detect inner ear abnormalities and damage; non-invasive optical chemical sensing; and indoor/outdoor UV-level detection.

For wearable designs requiring more advanced onboard monitoring and detection capabilities, Marktech offers a number of multi-wavelength emitter-detector combinations. These combinations may be seamlessly integrated into a single package along with a multi-wavelength range detector. In addition, Marktech’s Silicon and InGaAs photodetectors may be similarly combined with its GaP Schottky UV photodiodes, creating an expanded spectral detection range of approximately 150 nm to 1750 nm. Optoelectronics assemblies are available in plastic, ceramic, and glass-to-metal (hybrid) package types. A number of options are also available to effectively address specialty requirements for hermetic sealing, temperature extremes, and humid or moisture-rich environments.

In addition, Marktech high-brightness LEDs and LED emitters are routinely specified for wearable displays and remote physiological monitoring requirements. Standard LED emitters are offered in wavelengths from 280 nm to 1720 nm, with expanded wavelengths by special request. These Marktech LED emitters can be further optimized for low power consumption. Such optimizations can result in increased wearable device battery life, while still maintaining required output levels. The achievement of operating currents of 2 mA or less are also possible. In applications requiring the incorporation of a white LED, an assortment of color temperature and CRI are available, as well as lower-profile direct-attach (DA) type chip packages. Please consult the Marktech R&D team for applications assistance.

All design and testing of Marktech optoelectronics components and assemblies is conducted from the company’s worldwide R&D center in Latham (Albany), New York, USA. There, Marktech is able to design, develop and test optoelectronics components to customer exacting standards. Each new wearables design draws upon Marktech’s own vast portfolio of related success stories and applies the acquired value-added expertise of lessons learned. Wearable optoelectronics components from Marktech may be produced in virtually any sized quantity, from prototype to OEM volumes, with competitive lead times. Marktech also has the necessary full in-house capabilities to perform complete electrical and optical characteristics testing, from die-level to finished product designs, as well as complete end-to-end examinations of related components and assemblies. Wearables-specific applications engineering support is also available from one of the industry’s most experienced teams.

Contact us today for an applications assessment.

PR Author/Editorial and Advertising Inquiries:
Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150 -or- +44 (0) 2030 148924
inquiries@embassyglobalpr.com
www.embassyglobalpr.com

Marktech Optoelectronics Introduces InGaAs/InP Broadband PIN Photodiodes

Supporting High-Speed Communications, Autonomous Vehicles,
Industrial Controls, LIDAR and Wearables

Marktech Optoelectronics InGaAs InP PhotodiodesLatham, NY, USA  Marktech Optoelectronics, Inc. (www.marktechopto.com)(Marktech), a privately-held, veteran-owned, leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible (VIS), near-infrared (NIR), and short-wave infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced the global market introduction of the Model MTPD1346D-xx series, a family of InGaAs/InP broadband PIN photodiodes.

Marktech InGaAs/InP PIN photodiodes are designed to effectively convert broadband light into photocurrents within the VIS-SWIR range. In addition to their low noise, high sensitivity and high-speed response, they feature wide standard spectral ranges of 0.6 μm to 1.7 μm (1.7 μm material), low dark current, and high efficiency, typically 0.6A/W. Standard Model MTPD1346D-xx series broadband PIN photodiodes are offered in active area sizes from 0.1 mm to 3.0 mm. Each is packaged within a hermetically sealed, 3-pin TO-46 metal can with flat lens cap, and with choice of either thru-hole or surface mounting.

Small-to-medium-sized quantities of standard broadband PIN photodiodes are typically available with 24-hour shipment from stock via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, the photodiodes may be seamlessly integrated, together with Marktech SWIR emitters, as a single, compact package. Such custom and hybrid designs may be produced in as few as 6-8 weeks from customer prototype approvals. Please consult Marktech’s Latham, New York corporate headquarters and R&D center for assistance.

Marktech MTPD1346D-xx series InGaAs/InP broadband PIN photodiodes are designed to effectively support a diverse array of applications, particularly where high-speed performance, high data rates, low dark current, small capacitance, and smaller active area sizes are required.  Typical applications include aerospace, automation, autonomous vehicles, high-speed communications, industrial controls, LIDAR, medical, material and chemical analysis, security, and wearables, among others.

Founded in 1985, Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LEDs, detector components and assemblies in virtually any-sized quantity. Each Marktech product is designed and manufactured to customer exacting standards and is available with some of the industry’s most competitive lead times. The company’s engineering team also has the necessary full in-house capabilities to perform complete electrical and optical characteristics testing, as well as end-to-end examinations of all optical components, from die level to finished product designs. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

For more information about InGaAs/InP broadband PIN photodiodes, or other products from Marktech Optoelectronics, please click here.

PR Author/Editorial and Advertising Inquiries:
Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com
www.embassyglobalpr.com

Join the Marktech Team for Electronica 2018

The team at Marktech Optoelectronics looks forward to meeting customers and prospects at next week’s electronica 2018, November 13-16, 2018 at the Messe München Exhibition Center in Munich, Germany.

The team will be co-exhibiting with partner, EPIGAP Optotronics GmBH.

electronica is the world’s leading tradeshow for electronics, optoelectronics, sensors and related components. It is co-located this year with SEMICON Europa, making it one of the largest exhibitions for optoelectronics components in the world.

Onhand to meet customers and prospects at the Marktech booth, in Hall B4, Booth 152, will be Mark Campito, CEO; and Vince Forte, CTO.  To schedule a meeting onsite with Marktech during the show, please contact us at info@marktechopto.com.

Founded in 1985, the veteran-owned Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LEDs, detector components and assemblies in virtually any quantity. Each is designed and manufactured to customer exacting standards and is available with some of the industry’s most competitive lead times. The company’s worldwide R&D center in Latham, New York, has the necessary full in-house capabilities to perform complete electrical and optical characteristics testing, as well as end-to-end examinations of all optical components, from die level to finished product designs, with applications engineering assistance provided by one of the industry’s most experienced teams. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

For more information about available product line offerings from Marktech Optoelectronics, please visit www.marktechopto.com.

PR Author/Editorial and Advertising Inquiries:
Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com

Marktech Optoelectronics Joins AIM Photonics

November 6, 2018 – Latham, NY, USA Marktech Optoelectronics, Inc. (www.marktechopto.com)(Marktech), a privately held and veteran-owned leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced its membership in The American Institute for Manufacturing Integrated Photonics (AIM Photonics).

AIM Photonics is an industry driven, public-private United States Department of Defense-led engineering technology consortium, spearheaded by the State University of New York Polytechnic Institute (SUNY Poly). The consortium focuses the specialty expertise of its member base in order to capture critical global manufacturing leadership mindshare. It further recognizes the vital importance of integrated photonics as a technology essential to national security, and one that is well positioned to provide a significant return-on-investment to the U.S. economy. Through its partnerships with leading small-to-medium-sized industry manufacturers, academia, and service providers, AIM Photonics seeks to emulate the same 40-year dramatic successes that have already been achieved within the electronics industry, applying key lessons, processes, and best practices to the emerging photonic integrated circuit (PIC) sector. As part of that commitment, AIM Photonics offers practical access and technology on-ramps to various industry, government, and academic communities. In doing so, the consortium is creating a widely accessible and inherently flexible national PIC manufacturing infrastructure, which can effectively meet market challenges with practical, innovative solutions.

Notes Marktech CEO, Mark Campito, “Throughout Marktech’s nearly 35-year history, our unwavering commitment to the advancement of the photonics sector has been well demonstrated. It has formed the cornerstone of all that we do, in support of our many valued customers. By joining AIM Photonics, Marktech looks forward to reaffirming this commitment on a larger and more visible scale, while directly lending our vast R&D expertise to the evolving U.S. PIC technology roadmap.”

Founded in 1985, Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LEDs, detector components, and assemblies in virtually any quantity. Each is designed and manufactured to customers’ exacting standards and is available with some of the industry’s most competitive lead times. The company’s worldwide R&D center in Latham, New York, has the necessary full in-house capabilities to perform complete electrical and optical design characteristics testing. This includes end-to-end examinations of all optical components from die level to finished product designs, with applications engineering assistance provided by one of the industry’s most experienced teams. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

For more information about AIM Photonics, visit www.aimphotonics.com. For more information about Marktech Optoelectronics, please visit www.marktechopto.com.

PR Author/Editorial and Advertising Inquiries:
Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com

Marktech Optoelectronics Introduces PIN Photodiode UV-Enhancement Process for High Sensitivity, Low Noise and Long-term Stability Against UV and Gamma Radiation

Marktech PIN Photodiode UV-Enhancement Process

FOR IMMEDIATE RELEASE – September 21, 2018 – Latham, NY, USA  Marktech Optoelectronics, Inc. (www.marktechopto.com)(Marktech), a privately-held and veteran-owned designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced the global market introduction of its Series 4 UV-enhancement process for PIN photodiodes.

The new Series 4 process allows for the optimization of Marktech PIN photodiodes for accurate, effective measurements in both the UV and blue-green spectral ranges, or @365 nm (0.22 A/W), as well as over a wavelength range of 300 nm to 1100 nm. The process further allows the Series 4 to offer high sensitivity, low noise, low dark current, low capacitance and long-term stability against UV and Gamma radiation exposures.

Standard Series 4 UV-enhanced PIN photodiodes from Marktech are available with customer choice of either a TO-46 (3-pin) or TO-5 (2-pin and 3-pin) metal can package. Small-to-medium sized quantities are typically available with 24-hour shipment from stock via Marktech’s longtime distribution partner, Digi-Key Corporation. Beyond standard product, Series 4 UV-enhanced PIN photodiodes are offered with a full range of supporting LED emitter accessories, including UV, visible, and NIR types. The Marktech LED emitters can be supplied along with Series 4 PIN photodiodes as either two separate components; or, combined into a single, seamlessly integrated package, such as a reflective switch. Most custom and hybrid designs from Marktech are available in as few as 6-8 weeks from prototype approvals and may be produced in virtually any-sized quantity, from prototype to OEM volumes. Please consult the company’s Latham, New York-based worldwide R&D center and corporate headquarters for applications assistance.

The Series 4 process allows Marktech PIN photodiodes to be specified within virtually any application where high-sensitivity, low-noise performance and long-term stability against UV and Gamma radiation levels are required. Typical applications include, though are not limited to, color meters, currency authentication, photometry, spectroscopy equipment, analytical systems, and fluorescence. All Series 4 UV-enhanced PIN photodiodes are 100% designed, developed, and manufactured in the USA. Units are both REACH and RoHS compliant.

Founded in 1985, Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LEDs, detector components and assemblies in virtually any quantity. Each is designed and manufactured to customer exacting standards and is available with some of the industry’s most competitive lead times. The company’s worldwide R&D center in Latham, New York, has the necessary full in-house capabilities to perform complete electrical and optical characteristics testing, as well as end-to-end examinations of all optical components, from die level to finished product designs, with applications engineering assistance provided by one of the industry’s most experienced teams. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials. For more information about the new Series 4 PIN photodiode UV-enhancement process, or other offerings from Marktech Optoelectronics, please visit www.marktechopto.com.

Links to Product Datasheets:

PR Author/Editorial and Advertising Inquiries:
Ms. Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC for Marktech Optoelectronics
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com

New Silicon Avalanche Photodiodes for Low-Level Light and Short Pulse Detection

Silicon Avalanche Photodiodes from Marktech ElectronicsJuly 24, 2018 – Latham, NY, USA – Marktech Optoelectronics (www.marktechopto.com)(Marktech), a privately-held, veteran-owned, leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced the availability of its standard and custom Silicon avalanche photodiodes (Si APD’s), in quantities from prototype to OEM volumes.

Marktech Silicon avalanche photodiodes offer low-level light and short pulse detections of wavelengths between 400 nm and 1100 nm. They are offered with choice of either a 230 µm or 500 µm active diameter; optical sensitivity optimizations for 800 nm or 905 nm peak response; an internal gain mechanism; high gain at low bias voltage; extremely fast rise times, as low as 300 ps; frequency response to 1 GHz; and a low breakdown voltage of 80V to 200V. Units are also RoHS compliant.

Standard Silicon avalanche photodiodes are offered with multiple customization options, including operational voltage selection and Vbr binning, wavelength specific band-pass filtering, and hybridization. Package options include hermetically sealed TO metal cans, plastic, and cost-effective SMD (LCC) types, with additional customization by request. Standard Silicon avalanche photodiodes in small-to-medium sized volumes are typically available with 24-hour shipment via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, custom Si APD units from Marktech are typically available in as few as 6-8 weeks from prototype approvals. Please consult the factory for details.

As precision measurement devices, Marktech Silicon avalanche photodiodes offer low dark current and significantly higher sensitivities, including higher NIR spectral sensitivity, than can be achieved with a standard photodiode. This allows the Silicon avalanche photodiodes to serve as the semiconductor near-equivalent to photomultipliers within a myriad of applications. It also allows the Silicon avalanche photodiodes to accurately detect weaker light intensities, in applications where higher bandwidth or internal gain may be required, in order to overcome higher preamplifier noise levels. Typical applications for Marktech Silicon avalanche photodiodes include laser counting, x-ray spectroscopy, optical data communications, Light Detection and Ranging (LIDAR) instrumentation, optical rangefinders, spatial light transmitters, scintillation detectors, fast receiver modules, particle detectors, industrial surveying equipment, automated toll collectors, astronomy observation devices, and vehicle self-braking and self-parking systems.

Founded in 1985, Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LEDs, detector components and assemblies in virtually any sized quantity. Each is designed and manufactured to customer exacting standards and is available with some of the industry’s most competitive lead times. The company’s engineering team also has the necessary full in-house capabilities for the testing of complete electrical and optical characteristics, as well as to perform end-to-end examinations of all optical components, from die level to finished product designs. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

For more information about Silicon avalanche photodiodes or other offerings from Marktech Optoelectronics, visit www.marktechopto.com.

PR Author/Editorial and Advertising Inquiries:
Ms. Molly Bakewell Chamberlin
Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com

Marktech Optoelectronics Announces Expanded West Coast Photodetector Design and Manufacturing Capabilities

Marktech Optoelectronics Photodetector Design and Manufacturing Capabilities
A Complete Range of Photodetectors

May 9, 2018 – Latham, NY, USA Marktech Optoelectronics (www.marktechopto.com), a privately-held, veteran-owned leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including ultraviolet (UV), visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters; photodetectors; Indium phosphide (InP) epiwafers; and other materials, today announced the expanded photodetector design and manufacturing capabilities of Marktech West, its fully dedicated second facility in Simi Valley, California, USA.

Established in 2015, the 3800 square-foot Marktech West offers all the necessary infrastructure, technology, and engineering expertise for the design, development and manufacture of high-reliability photodetectors, in quantities ranging from prototype to OEM volumes, from wafer design stage up thru complete subsystems. Extensive Marktech investments in advanced production technology and equipment, including a Class 1000 (ISO 6) cleanroom, have created a highly controlled manufacturing environment in which to produce both Silicon (Si) and Indium gallium arsenide (InGaAs) photodetectors of the highest possible quality. Available offerings, each with extensive front- and back-end customization capabilities, include:

  • UV detectors, with spectral sensitivities from 150 nm to 570 nm, and further incorporating gallium phosphide (GaP), gallium nitride (GaN) and Silicon carbide (SiC) materials, for superior long-term stability, high device sensitivity and low dark current;
  • Silicon photodiodes and silicon phototransistors, with spectral sensitivities from 350 nm to 1100 nm, for visible and NIR applications requiring low noise, high speed and high sensitivity. Silicon wafers and chips are optimized to ensure uniform, consistent performance and high reliability. Available cost-effective customization capabilities to exacting standards include wavelength specific band-pass filtering, and hybridization.
  • Avalanche photodiodes (APD’s), featuring higher sensitivities than standard photodiodes, for high-accuracy, low-level light (LLL) detection, short pulse detection, and applications requiring higher bandwidth or internal gain, as required to overcome high preamplifier noise levels. Standard Marktech APD’s offer an internal gain mechanism, fast rise times, low dark current, and high NIR spectral sensitivity. Available cost-effective customization options to exacting standards include operational voltage selection (Vbr binning), wavelength specific band-pass filtering, and hybridization. Silicon-based APD’s (Si APD’s), supporting high-speed and low-light-level NIR optical detection from 400 nm to 1100 nm, are offered with active area sizes of 230 um and 500 um, and with peak response optimization of either 800 nm or 905 nm.
  • 100% US-based custom silicon chip and wafer design and processing, with designs for long-term stability, radiation hardness and high-reliability against UV and Gamma radiation.
  • GaP Schottky photodetectors, specially optimized for high-accuracy UV photodetection up to the visible spectrum, 150 nm to 550 nm.
  • Standard photovoltaic or photoconductive silicon photodiodes, with spectral sensitivities from 350 nm to 1100 nm, for applications requiring high-broadband sensitivity, moderate-to-fast response speeds, and optimized spectral enhancements.
  • InGaAs PIN photodiode chips, in active area sizes from 0.1 to 3.0 mm, with spectral sensitivities from 800 to 2600 nm. Marktech InGaAs PIN photodiode chips offer an optimal balance between low dark current, high speed and light sensitivity. No thermoelectric cooling is utilized in the manufacturing of Marktech PIN photodiodes, thereby reducing costs and improving overall efficiencies.
  • Foundry services, for the epitaxial growth of high-reliability SWIR wafers in the 1.0 μm to 2.6 μm range, with InP material as the base substrate, in 2″, 3″ and 4″ diameters.

Additional facility capabilities include mask design, custom packaging, and hybrid electronic designs. Front-end customization options include chip geometry design flexibility; responsivity to operating wavelengths; rise times to unique bandwidths; capacitance, for reduced noise and increased speed; dark current, for improved dynamic range; and anti-reflective coatings, for reduced optical losses. Back-end customization capabilities to unique environmental requirements include filter-in packages, for reduced ambient light effects; optical component add-ons, such as optical lenses, scintillators, etc.; light sources, including LEDs or laser dice for assembly miniaturization; integration of heaters, coolers, temperature sensors and op-amps; and custom packaging. Photodetectors are typically packaged within a variety of transistor metal case styles, in sizes from TO-18 to B-1032. Optoelectronic modules are further offered, for simplified application integration and evaluation.

Notes Marktech Optoelectronics president, Bill Moore, “We are pleased to announce our expanded West Coast photodetector design and manufacturing capabilities, established for the added convenience of our valued customers. These capabilities now allow us to manufacture a variety of photodetectors with highly competitive lead times, in anywhere from prototype to OEM volumes, using the very latest equipment and manufacturing processes. We look forward to continuing to advance our in-house manufacturing capabilities, in response to customer needs.”

Founded in 1985, the Albany, New York-based Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its field-proven capabilities to produce custom LED and photodetector components and assemblies in virtually any quantities. Standard product samples and ranges are offered to customers globally via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, the company’s engineering team has the necessary full in-house capabilities for the testing of complete electrical and optical characteristics, as well as to perform end-to-end examinations of all optical components, from die level to finished product designs. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

For more information about Marktech Optoelectronics and its photodetector design and manufacturing capabilities, visit www.marktechopto.com.

 

PR Author/Editorial and Advertising Inquiries:
Molly Bakewell Chamberlin
President / Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.800.309.6150
inquiries@embassyglobalpr.com

Marktech Optoelectronics Announces Worldwide Strategic Partnership with Sensing and Photonics Industry Growth Experts Embassy Global

Embassy Global Sensing Photonics Optoelectronics Industry Growth ExpertsDecember 6, 2018 – Latham, NY, USA  Marktech Optoelectronics (www.marktechopto.com) (Marktech), a privately-held, veteran-owned, leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced its worldwide strategic sales and marketing partnership with sensing and photonics industry growth experts, Embassy Global.

Founded in 1985, the Albany, New York-based Marktech has built a strong industry pedigree for R&D excellence. As a renowned optoelectronics engineering, design, and test facility, Marktech’s unique core competencies are rooted in its proven capabilities to produce custom LED and detector components, and assemblies, in virtually any quantities. Each is designed and manufactured to customer exacting standards and available with some of the industry’s most competitive lead times. Standard product samples and ranges are offered to customers globally via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, the company’s engineering team has the necessary full in-house capabilities for the testing of complete electrical and optical characteristics, as well as to perform end-to-end examinations of all optical components, from die level to finished product designs. Recently, the company added a second facility in Simi Valley, California, for the expanded production of its industry best-selling detector lines. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials.

Based in Western New York and with worldwide presence, the 100% woman-owned Embassy Global is an integrated strategic technical marketing, PR and business development firm. The firm’s unique value proposition is its role as 20-year recognized experts in the effective strategic growth of client product technologies and applications, combined with its one-of-a-kind knowledge, skill sets and relationships. Embassy Global is the only firm in the world whose work is 100% dedicated to the advancement of the sectors it serves. Now celebrating its tenth year, Embassy Global is proud to collaborate with some of the most prominent industry manufacturers in North America, Europe and Asia Pacific.

Notes Marktech Optoelectronics CEO, Mark Campito, “From the moment that Marktech and Embassy Global began discussions about a potential partnership, we recognized the unique knowledge and understanding of the optoelectronics and photonics sectors that Embassy Global demonstrated, which we felt would bring excellent value to our company. Year to date, we’ve seen a more than 25% increase in overall website visitors, all derived from the PR program. We have also enjoyed extensive PR coverage within highly industry relevant channels, worth approximately $165k.  We look forward to further growing Marktech’s industry reach, in continued collaboration with our partner, Embassy Global.”

For more information about Marktech Optoelectronics and its offerings, visit www.marktechopto.com. For more information about Embassy Global and its expertise, please visit www.embassyglobal.com.

Marktech Optoelectronics Releases Optoelectronic Customization eBook

PRESS RELEASE JAN 23, 2018

Marktech Marktech Optoelectronics has just released an eBook titled “A Brief Introduction to Customization”. This 67 page Optoelectronic Customization eBook is a valuable

Marktech Optoelectronics Optoelectronic Customization eBook
Optoelectronic Customization eBook

resource for anyone interested in custom designed emitters, detectors, and assemblies to optimize a new or existing product, performance, or simply curious about the latest advances in optoelectronics.

Beginning with Custom Emission Materials (UV, Visible, Near IR, and SWIR), we explore how specific wavelengths can optimize your products performance. Utilizing in-depth information combined with illustrations we will explore how your choice of chip and other factors, including how you drive the component, will effect degradation and the lifetime of your product. In addition, this chapter of the Optoelectronic Customization eBook covers wire bonding techniques, illumination patterns and output.

The other chapters cover Custom Detection Materials, Packaging, Design, Testing, and Binning and finally, Getting Started where we discuss the various steps to bring your idea from concept to prototype to finished component or assembly.

Marktech’s CTO “This Optoelectronic Customization eBook represents our accumulated experience and knowledge gathered in 30 years of manufacturing custom optoelectronics components and assemblies” according to Vincent Forte, Marktech’s CTO.

To obtain a copy, please complete the Custom Optoelectronics eBook form.

About Marktech
Founded in 1985, the Albany, New York-based Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned engineering, design, and test facility, Marktech’s unique core competencies are rooted in its field-proven capabilities to produce custom LED and photodetector components and assemblies in virtually any quantities. Standard product samples and ranges are offered to customers globally via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, the company’s engineering team has the necessary full in-house capabilities for the testing of complete electrical and optical characteristics, as well as to perform end-to-end examinations of all optical components, from die level to finished product designs. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials. For more information about Marktech Optoelectronics and its product offerings, visit www.marktechopto.com.

So tell us: What do you want to build?

Bring Marktech your idea; we can manage the entire process for you, from design to prototype, from testing to production and QA. www.marktechopto.com

Marktech Optoelectronics Introduces Its SERIES 4 Photodiode Process

The Marktech Optoelectronics SERIES 4 Photodiode Process is specifically designed for use @365 nm (.22A/W) or in Blue/Green applications requiring very high sensitivity, low noise and long-term stability against UV and Gamma Radiation

Marktech Optoelectronics SERIES 4 Photodiode Process
SERIES 4 Photodiode Process

Latham, New York , January 16, 2018 (Newswire.com) – Marktech Optoelectronics, a Latham, New York-based manufacturer of standard and custom optoelectronics, has announced its new SERIES 4 photodiode process. The SERIES 4 photodiode process was specifically designed for use @365 nm (.22A/W) or in Blue/Green applications requiring very high sensitivity, low noise and long-term stability against UV and Gamma Radiation.

These photodiodes are well suited for measurements in photometry or in analytical systems as well as for fluorescence measurements. In addition to measurements in the optimized blue and UV spectral range the photodiode can be used for measurements in the entire wavelength range between 300 nm and 1100 nm. Currently available from stock in two sizes 1.2mm² or 7.5mm² in hermetic packages, this process can also be used in our other standard sizes or can be made custom to optimize your application.

Please Visit Marktech Optoelectronics at Photonics West Booth Number 221. January 27 – February 1, 2018, at The Moscone Center, San Francisco, California, USA. For more information on Marktech’s SERIES 4 photodiode
process, please visit www.marktechopto.com.

About Marktech:
Founded in 1985, the Albany, New York-based Marktech Optoelectronics has built a strong industry pedigree for R&D excellence. As a renowned engineering, design, and test facility, Marktech’s unique core competencies are rooted in its field-proven capabilities to produce custom LED and photodetector components and assemblies in virtually any quantities. Standard product samples and ranges are offered to customers globally via Marktech’s longtime distribution partner, Digi-Key Corporation. In addition, the company’s engineering team has the necessary full in-house capabilities for the testing of complete electrical and optical characteristics, as well as to perform end-to-end examinations of all optical components, from die level to finished product designs. Marktech is also a Cree Solution Provider for high-brightness LEDs and materials. For more information about Marktech Optoelectronics and its product offerings, visit www.marktechopto.com.

So, tell us: What do you want to build?
Bring Marktech your idea; we can manage the entire process for you, from design to prototype, from testing to production and QA. www.marktechopto.com